home *** CD-ROM | disk | FTP | other *** search
- ------- CONVRG (Function Key) -------
-
-
- -- Sometimes you may want to connect two existing figures on the screen
- at their endpoints. Even through the use of FIND PT/MOVE PT,
- you may only be able get the endpoints very near to one another because
- the high degree of detail provided in high-res graphics makes it
- difficult to cause these figures to come together at the exact
- same point.
-
- -- By using CONVRG (converge) after placing the cursor between the
- endpoints of the two figures, this progam will pull the two
- figures together.
-
- NOTE Literally it will bring the endpoints of all figures that
- are within 2 horizontal and 2 vertical dots of the cursor
- to the location of the cursor.
-
- NOTE Before a CONVRG can be effective, the endpoints must have
- been brought very close together (5 dots maximum).
-
- Then the cursor must be properly placed between them.
-
- Then and only then will pressing the CONVRG function key
- be effective.
- y placed between them.
-
- Then and only then will press